SKF NU2318ECP cylindrical roller bearings

Volume Discount:Available; Bearing Part Number:6007; Width T(mm):80; Flange Shape:Square Type; Number of Bearings:Double; Bearing Material:[Steel] Steel; Shape:Flanged Pilot Type; Flange O.D. H(φ):104; Days to Ship:8 Days; Bearing Retained:Yes (with retaining;

G:M6x1; s1:33 mm; Weight:6.07 kg; H:163 mm; SW:5.56 mm; L2:23 mm; T min.:-20 °C; S:25 mm; A:66 mm; B:66 mm;

Days to Ship:6 Days or more; Surface Treatment:Surface Treatment; Thread Nominal M(mm):M45X1.5; Type:Lock Nut; Shape:Round shape; Nominal Number:HLB-09; Type:Lock Nut; Shape:Round shape; Screw Type:Metric (fine) Thread; Screw Type:Metric (fine) Thread;

Max. Allowed rpm(rpm):9500; Rolling Element Material:[Steel] Steel; Special Configurations Code:No; Inner/Outer Ring Material:[Steel] Steel; Seal, Shield Symbols:No; Outer Ring Shape:Flat; Symbol of contact angle:A; Load Direction:Radial; Outer Ring:With Outer Ring; Basic Dynamic Load Rating(N):2310

H1:20 mm; C:33.5 kN; J:160 mm; H2:106 mm; Designation of housing:P307-; d1:52 mm; T min.:-20 °C; H:56 mm; T max.:100 °C; Adapter sleeve reference:H2307;

T max.:100 °C; Designation of bearing:US207G2T04; d:35 mm; L:118 mm; Weight:1.52 kg; A:36 mm; A2:44.5 mm; B:32 mm; A1:12.5 mm; C0:15.2 kN;

Flange Shape:Round Type; Bearing Retained:Yes (with retaining; RoHS:6; Housing Material:[Aluminum Alloy] 201; Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; Width T(mm):65; Type:Bearings with Housin; Days to Ship:7 Days; Bearing I.D. d(mm):15;

Flange O.D. H(φ):40; Shape:Flange Type; Bearing Retained:No; Volume Discount:Available; Number of Bearings:Single; Bearing Part Number:6900; Bearing I.D. d(mm):10; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Holder Surface Treatment:Not Provided;

Weight:0.43 Kg; Bore Size d:65 mm; Outside Diameter D:100.000 mm; Clearance:C3; Features:Shields; Oil Reference Speed:9700 rpm; Outside Ring Width B:18.000 mm; Cr - Dynamic Load Rating:30.5 kN; C0r - Static Load Rating:23.5 kN; Grease Reference Speed:6700 rpm;

Dimension R:0.16 in; Shaft Size  :45 mm; Full Timken Part Number:QMCW09J045SB; C - Dynamic Load (Basic):24500 lb; Dimension J (Bolt Size):0.438 in; C0 - Static Load:24200 lb; Dimension H:0.40 in; Eng Internal Radial Clearance - Min:0.0014; Oil Lubrication - B/C/O Seal:1950 rpm; Shaft Toler

Z:41.5 mm; Recommended tightening torque for set screw:5.5 Nm; Designation of closed end cover:SCCE203; G:M6x1; H:102 mm; Weight:0.36 kg; d:15 mm; C:9.55 kN; N:10mm; S:6.5 mm;

Mass:0.26 kg; B:16 mm; da min:55 mm; Static load, C0:16.6 kN; Characteristic outer ring frequency, BPF0:6.06 Hz; rs min:1 mm; Characteristic rolling element frequency, BSF:7.31 Hz; Da max:75 mm; f0:15.5; Characteristic inner ring frequency, BPFI:7.94 Hz;

Volume Discount:Available; Bearing Retained:Yes (with retaining; Bearing Retained:Yes (with retaining; Width T(mm):30; Bearing Material:[Steel] Steel; Seals:DD (Contact Rubber S; Flange Shape:Square Type; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Type:Bearings with Housin;

Days to Ship:9 Days; B:7; Size Standards:Metric System; Number of Raceway Ring Rows:Single Row; Grease symbol:/2AS; Precision:Grade 0; d:45; Load Direction:Radial; D:58; Type:Ball;

Dimension J:19.5 in; Maximum Speed:1450 rpm; Series Type:Light Series; Cor - Static Load Rating:149273 lbf; Bearing Number:LSE600BX; Bearing - Housing - Seal:LSE600BXHHTPS; Shaft Size:6 in; Support Type:Four-Bolt Plummer Bl; Bearing Type:Split Cylindrical Ex; Dimension H1:1.6 in;